TRAK FHM7 CNC Bed Mill with long 23" x 60" travels
TRAK FHM7 CNC Bed Mill with long 23" x 60" travels
Contact us for price
Location:Wausau, WI
Description
Very Good Used TRAK FHM7
Wired: 220V, 3PH
This mill came out of a design shop, never in production.
This is the largest mill in TRAK's line, with outstanding travels and capacities
TRAK Bed Mills FHM7 features:
ProtoTRAK SMX CNC
A solid ram that moves along the column providing mass for heavy cuts
Generous Z-axis CNC travel
Strong and rigid construction
Two or three-axis CNC operation, your choice
Programmable spindle speeds
Precision ground ballscrews installed in the table, saddle and column
Manual quill with integrated quill and ram encoders
Wide way surfaces that are hardened and ground, slide ways are Turcite® coated
With these important differences:
60” X and 23” Y travel and 20.50” Z travel
Strong and rigid – over 7600 lbs. of machine mass
Fixed head for outstanding rigidity
Standard electronic hand wheels with selectable fine/coarse hand wheel resolution
NMTB40 spindle taper and over 5” of quill diameter
250 inch per minute rapid travels
Specifications
Table size – 76″ x 14″
T-slots (number x width x pitch) – 4 x 16mm x 63.5mm
Travel (X, Y, Z axis) – 60″ x 23″ x 20.5″
Quill diameter – 5.06″
Spindle taper – NMTB 40
Spindle speed range RPM – 200-5000
Spindle center to column face – 23″
Spindle motor power – 7.5 HP
Power requirement, control – 110V, 1P, 15A
Power requirement, machine – 220V, 3P, 60HZ
Current, Full Load Amps – 37.5 FLA
Maximum weight of workpiece – 2200 lbs.
Height of table from bottom of bed – 38.25″
Maximum spindle nose to table – 21.5″
Minimum height – 95.5″
Maximum height – 101″
Width of machine including table – 110.5″
1. Length with electric box door closed – 93.75″
2. Overall width including full table travel – 171.65″
3. Overall length with electrical door open – 119.5″
4. Footprint – 37″ x 62.2″
5. Way surface – dovetail X axis; square ways Y and Z axis
6. Weight (approximate) net – 7650 lbs.
7. Weight (approximate) shipping – 7975 lbs.
8. Drilling max capacity – 1″ dia.
9. Tapping max capacity – 5/8″
10. Milling max capacity – 7 inch3/min
11. Way surfaces hardened and ground
12. Turcite coating on all slide ways
13. Automatic lubrication pump
14. Auxiliary function hardware
15. Limit switches
16. TRAKing/Electric Hand wheels
Specifications
Manufacturer | TRAK BY SOUTHWESTERN INDUSTRIES |
Model | FHM 7 CNC |
Condition | Used |